part number 856909 1601.5 mhz saw filter data sheet subject to change or obsol escence without notice rev a 0 2 /10 ? triquint semiconductor page 1 of 5 features usable bandwidth of 17 mhz for gps applications - glonass low insertion loss high attenuation single - ended operation hermetic rohs compliant (2002/95/ec), pb - free package pin configuration surface mount 3.00 x 3.00 x 1.22 bottom view smp - 12 single - ended configuration pin no. description 2 input 5 output 1,3,4,6 case ground dimensions shown are nominal in millimeters all tolerances are 0.15mm except overall length and width 0.10mm body: al 2 o 3 ceramic lid: kovar , ni plated terminations: au plating 0.5 - 1.0 m, over a 2 C 6 m ni plating pb 6 5 4 3 2 1 0.69 1.22 nom. 1.32 max. 0.75 0.60 1.50 0.75 3.00 3.00
part number 856909 1601.5 mhz saw filter data sheet subject to change or obsol escence without notice rev a 0 2 /10 ? triquint semiconductor page 2 of 5 electrical specifications (1) operating temperature range: (2) - 40 to +85 c parameter (3 ) minimum typical ( 4 ) maximum unit center frequency - 1601.5 - mhz m axi mum insertion loss 1593 - 1610 mhz - 2.2 4.0 db amplitude variation 1 593 C 1 610 mhz - 0.6 2.5 db p - p group delay ripple 1593 C 1610 mhz - 12 27 n s p - p absolute attenuation ( 5 ) 700 C 14 00 mhz 1400 C 1530 mhz 1530 C 1565 mhz 1630 C 1640 mhz 1640 C 1650 mhz 1650 C 1670 mhz 1670 C 1870 mhz 1870 C 2270 mhz 2270 C 2700 mhz 40 35 10 10 22 30 40 35 30 44 4 6 1 8 40 52 55 50 51 36 - - - - - - - - - db db db db db db db db db input/output vswr 1593 C 1610 mhz - 1.6 2 - source impedance : (single - ended) (6) load impedance : (single - ended) (6) - - 50 50 - - ? ? notes : 1. all specifications are based on the triquint test circuit shown below 2. in production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. electrical margin s has been buil t into the design to account for the variations due to temperature drift and manufacturing tolerances 4. typical values are based on average measurements at room temperature on pcb 5. relative to zero db 6. this is the optimum impedance in order to achieve the perf ormance shown test circuit: actual matching values may vary due to pcb layout and parasitics 50 single - ended input 50 single - ended output 1,3,4,6 2 5 50 50
part number 856909 1601.5 mhz saw filter data sheet subject to change or obsol escence without notice rev a 0 2 /10 ? triquint semiconductor page 3 of 5 typical performance (at room temperature )
part number 856909 1601.5 mhz saw filter data sheet subject to change or obsol escence without notice rev a 0 2 /10 ? triquint semiconductor page 4 of 5 matching schematics actual matching values may vary due to pcb layout and parasitics 50 single - ended input 50 single - ended output marking pcb footp rint the date code consists of: day of the current year (julian, 3 digits), y = last digit of the year and m = manufacturing site code this footprint represents a recommendation only dimensions shown are nominal in millimeters tape and reel d imensions shown are nominal in millimeters packaging quantity: 5 000 units/reel 1,3,4,6 2 5 50 50 ge code marking date code jjjym logo id dot triquint .96 3.20 sq 1.27 .38 .81 1.70 ?102 ? 20.2 ? 13.0 2.0 direction of travel ? 330 12.8 2.7 logo id dot triquint 3.25 section a-a 1.75 ? 1.5 4.0 a 12.0 5.5 ? 1.5 4.0 2.0 3.25 1.4 0.21 a
part number 856909 1601.5 mhz saw filter data sheet subject to change or obsol escence without notice rev a 0 2 /10 ? triquint semiconductor page 5 of 5 maximum ratings parameter symbol minimum maximum unit operating temperature range t - 40 +85 o c storage temperature range t stg - 40 +85 o c important notes warnings el ectrostatic sensitive device (esd) avoid ultrasonic exposure rohs compliance this product complies with eu directive 2002/95/ec (rohs) solderability c ompatible with jesd22 - b102, pb - free process, 260c peak reflow temperature ( see soldering profile ) links to additional technical information pcb layout tips qualification flowchart soldering profile s - pa rameters rohs information other technical information triquints liability is limited only to the surface acoustic wav e (saw) component(s) described in this data sheet. triquint does not accept any liability for applications, processes, circuits or assemblies, which are implemented using any triquint component described in this dat a sheet. contact information phone: +1 (407) 886 - 8860 fax: +1 (407) 886 - 7061 email: info - product@tqs.com web: www.triquint.com or contact one of our worldwide network of sales offices, representatives or distributors po box 609501 orlando, fl 32860 - 9501 usa pb
|
